222 found, showing page 2 of 15
WELDING ROD MILD 5/32 E6013 5LB
E6013 mild steel "General Purpose" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work, etc.
- Recommended Polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 5/32"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 83,000
- Amperage: 115-140
View Details
Call for Price
ROD LW HYDRO 3/32 1LB
E7018 mild steel "Low Hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 3/32"
- Weight Lbs. (Kg): 1 (.453)
- Tensile Strength (PSI): 84,000
- Amperage: 65-100
View Details
Call for Price
WELDING ROD LH 3/32 E7018 5LB
E7018 mild steel "Low Hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use forfield erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 3/32"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 84,000
- Amperage: 65-100
View Details
Call for Price
WELDING ROD LH 1/8 E7018 1LB
E7018 mild steel "Low Hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 1 (.453)
- Tensile Strength (PSI): 84,000
- Amperage: 100-140
View Details
Call for Price
WELDING ROD LH 1/8 E7018 5#
E7018 mild steel "Low Hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 84,000
- Amperage: 100-140
View Details
Call for Price
WELDING ROD LH 1/8 E7018 10#
E7018 mild steel "Low Hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 84,000
- Amperage: 100-140
View Details
Call for Price
WELDING ROD LH 5/32 E7018 5LB
E7018 mild steel "low hydrogen" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis.
- Recommended Polarity: DCEP (Reverse) or AC
- Diameter (Inches): 5/32"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 84,000
- Amperage: 140-190
View Details
Call for Price
Forney 210 MIG Welder
The Forney 210 MIG welder is a versatile machine for farms, automotive, boats, general fabrication and repair welding. This machine is MIG ready with regulator and gas hose. The Forney 210 MIG is a new machine For Forney and offers quality features like spool gun capability, quick disconnect torch, 10' gun/torch, aluminum feed/drive system, cable wrap, versatile despooler and large cabinet with easy spool access. The quality, performance, and value of this machine will impress.
- Quick-connect MIG gun with Tweco compatible consumables
- Long 10' (3.05m) MIG gun/torch
- Long 15' (4.57m) power cord
- Spool gun ready
- Integrated cable wrap
- Aluminum wire feeder and drive system
- Quality and adaptable spool holder/retainer
- Standard U.S. gas hose set-up
- Flowmeter and gas hose included
- Quality metal cabinet with no assembly required, improved spool access and more space inside, and fold up door
- Full graphics box, quick-start guide, and owner's manual
- Height: 16" (406 mm)
- Width: 10-1/4" (260 mm)
- Length: 20-1/4" (514 mm)
- Weight: 78 lbs. (35.4 Kg)
View Details
Call for Price
WELDING ROD MILD 3/32 E6011 1LB
E6011 mild steel "Deep Penetration" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 3/32"
- Weight Lbs. (Kg): 1 (.453)
- Tensile Strength (PSI): 88,000
- Amperage: 25-75
View Details
Call for Price
WELDING ROD MILD 3/32 E6011 5LB
E6011 mild steel "Deep Penetration" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 3/32"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 88,000
- Amperage: 25-75
View Details
Call for Price
WELDING ROD MILD 1/8 E6011 1LB
E6011 mild steel "Deep Penetration" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 1 (.453)
- Tensile Strength (PSI): 88,000
- Amperage: 35-125
View Details
Call for Price
WELDING ROD MILD 1/8 E6011 5LB
E6011 mild steel "Supersixty" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 88,000
- Amperage: 35-125
View Details
Call for Price
WELDING ROD MILD 1/8 E6011 10LB
E6011 mild steel "Supersixty" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity).
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 10 (4.53)
- Tensile Strength (PSI): 88,000
- Amperage: 35-125
View Details
Call for Price
WELDING ROD MILD 1/8 E6011 50#
E6011 mild steel "Deep Penetration" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 1/8"
- Weight Lbs. (Kg): 50 (22.7)
- Tensile Strength (PSI): 88,000
- Amperage: 35-125
View Details
Call for Price
WELDING ROD MILD 5/32 E6011 5LB
E6011 mild steel "Deep Penetration" is an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe.
- Recommended polarity: AC, DCEP, DCEN (Either Polarity)
- Diameter (Inches): 5/32"
- Weight Lbs. (Kg): 5 (2.26)
- Tensile Strength (PSI): 88,000
- Amperage: 50-160
View Details
Call for Price
